Top Causes of Broken Garage Springs

As one of the most important parts on garage doors, the springs are an important feature that is used to counteract the force of gravity on the door. The door becomes easier to lift, both manually and with the use of the garage door motor. It’s important to know the top reasons of damaged springs to ensure you can get them immediately replaced by a professional and prevent them from breaking again in the future.

Rust on the Garage Door Springs

Rust is known to develop on the springs when the parts come in contact with moisture. Homeowners can prevent rust from forming by applying WD-40 every three months, which will increase the lifespan of the parts. The springs will have a barrier that will protect the parts and will allow them to operate better each time the door opens or closes. Most springs should last an average of 10,000 cycles before they need to be replaced.

Incorrect Springs Installed

Many homeowners aren’t aware that they have the wrong springs installed on their garage door with their length and size. The springs won’t be able to work well with the other garage door parts. There should be one torsion spring on each side of the side of the garage door. Using two springs will ensure that they can share the weight load each time the door is opened or closed.

A Lack of Maintenance

Poor maintenance is an additional cause of broken springs, especially if the residents fail to properly lubricate the parts throughout the year. Make it a point to spray down the coil every four months and also check the balance of the door to ensure too much weight isn’t applied to the springs. If the garage door is unbalanced, the torsion springs will quickly break and require San Luis Obispo garage service to ensure they’re replaced by a professional technician.